When you entail to access the components inside the door of your 2005 GMC Sierra, you Testament acquire to remove the inner door panel. Remove the two plastic plugs on the face of thee door panel by prying them gone, duration careful not to scratch the door panel. A Apartment lodgings screwdriver or consubstantial tool works well for this. Locate the Torx head screws behind the plugs with a T20 Torx screwdriver.
1. Clear the door of your Sierra and fix the baby, triangular panel at the top of the door, dispassionate at the end the mirror. It is held in city by two mini clips so honorable carefully pry it off the frame with a Apartment lodgings screwdriver or putty ooloo.
2. Remove the insert surrounding the door lock, carefully prying it off with a Apartment lodgings screwdriver or other in agreement factor. Remove the screw carry on the panel with a Phillips screwdriver.
3. While the mechanism can be involved, it actually is not arduous. Be ideal careful as you remove the panels and covers, as most of them lack prying gone and it is as well elementary to scratch the panel provided your object slips or provided you are not paying fast care as you chore.
Instructions
4. Locate and remove the 7mm screw behind the armrest using a socket and nut driver. Remove the trim around the inner door handle by prying it off with a flat screwdriver. It pops loose very easily but again, be careful not to scratch the panel as you remove it.
5. Locate the 7mm screw in the bottom of the storage compartment in the base of the door then locate the 7mm screw on the bottom edge of the panel and remove both screws with a nut driver.
6. Lift the door panel slightly and pull it away from the door about 3 to 4 inches. Reach up under the door panel, release the locking tab on the electrical connector on the back of the window, door lock and mirror-switch assembly. Pull the connector down to remove it from the switches and then lift the panel completely off the door.
