The cabin filter in your Honda van cleans all of the air that comes in wound up your ventilation process. Provided not changed on a habitual grounds, dirt and debris can author reduced air flow, mould and unpleasant smells.
Instructions
1. Govern the passenger side front door and remove the slender triangular panel on the side of the sprint. Unscrew the three Phillips intellect screws remain the panel.
2. Pull emptied the glove box and remove the plastic stoppers located at the back on Everyone side. Press in on the elsewhere of the stopper, In relation to the interior of the glove box; you'll taction a pop and the stoppers Testament come free of charge. Speedy the glove box.
Remove any debris from the interior of the air box while you have the filter out.8. Put the new cabin filter in and replace all panels, screws and bolts in the reverse order that they were taken out.
4. Unscrew the Phillips head screws and the 10mm bolts from the metal brace bar. Remove the bar by lifting up on one end and then the other.
5. Remove the glove box from the dash. Open the glove box and pull it towards you, though some models like the 2000 Accords require pulling the glove box up, then towards you.
6. Find the removable access door on the air box and remove it. This door should be relatively narrow, with a tab on the top and a hinge on the bottom. Pull up on the tab and the access will swing forward and come off.
7. Remove the old cabin filter. Some models like the Civic and CR-V have two small filters while Odysseys and Pilots will have a single, large filter.3. Set off from the passenger side of the sprint and pull the trim panel back, working your course In relation to the centre console; the left side Testament not come outside, so don't cleft it. Consent the panel pulled outside from the sprint.
