Older wood stoves ooze smoke and fly ash.
4. Look at the honeycomb openings of the catalytic element. If the element contains no fly ash, replace the catalytic element into the catalytic combustor and reinstall the firebricks into the wood stove.5. Exorbitant fly ash coats objects in the existence of the chimney, including vehicles and outdoor furniture. The U.S. Environmental Safeguard Agency requires catalytic converters in undeniable geographic areas.
Instructions
1. Assign plastic sheeting on the floor surrounding the Vermont Castings wood stove.
2. Remove the firebricks from the bottom of the wood stove. Pull the steel clips off the firebricks. Slide the firebricks from the wood stove. Pull the wedges from the sides of the lower firebrick. Move the lower firebrick away from the catalytic combustor.
3. Lift the catalytic access panel from the top of the catalytic combustor. Remove the catalytic element from the combustor chamber.
A wood stove catalytic converter burns further gases contained in smoke from a wood embers, releasing cleaner stove exhaust into the atmosphere. The cleaner exhaust contains fewer toxins and minimal amounts of fly ash or soot. Fly ash discolours the world encompassing the chimney stack.
Move a clogged catalytic element outside in an area away from vehicles and concrete surfaces.
6. Blow out the honeycombs of the catalytic element. Place the tip of a fireplace bellows 6 inches from the face of the catalytic element. Slowly push the handles of the bellows together to send a gentle stream of air into the honeycombs, removing the fly ash.
7. Place the cleaned catalytic element in the catalytic combustor. Reassemble the wood stove after you complete the cleaning process.
