Tuesday 21 October 2014

Remove A Door Panel On Jeep Liberty

Whether you're attracted in changing the speakers that come with your Jeep Liberty, one of the bottom line steps in removing the broken down speakers and adding contemporary ones is removing the door panel. It's the needed front action. Oherwise you cannot access the speakers to remove them and mount contemporary ones. Removing a door panel isn't as compacted as you might esteem, with the manipulate of facile tools and this american man.


Instructions


1. Bargain the door Proceeds knob. Whether you glimpse closely at the centre of the trim environing the practice, you'll see a small plastic screw cover. There will be connectors for the power windows and power door locks. Lift the door panel away when the wiring connections are loose.


There are eleven of these, so be patient and work small areas at a time until the entire panel is loose.


3. Pull the panel away slightly from the door. Unplug any wiring connectors behind the door. Pry this off to expose the head of a Phillips screw. Remove the screw with your Phillips screw driver and set the screw and its cover aside.2. Take your panel tool and pry around the edges of the door panel to release the clips that hold the door panel in place.