Friday 17 October 2014

Faux Copper Patina Painting Crafts

The charm of verdigris is manageable to accomplish.


Verdigris is a constant patina that turns copper a dusty turquoise or greenish colour. It occurs when the copper is exposed to the elements---you can clock verdigris patina on the hardware of sailing vessels due to the reaction of spiciness on the metal. To receive the see, you don't carry to hunt for antiques that hold acquired the patina over era. It's evident to discover your own verdigris pieces to embellish your local or garden.


Aged Garden Pots


"Out of date" your patio, garden or front entry with a no problem one- or two-step distemper treatment that can hour inexpensive flower pots in virtually no continuance. A smooth Stop concrete or clay pot, planter or urn is easiest to convert with a apparatus you can pay for at an Craft overhaul, Art or colouring store.


Disinfected the pot and let it dry. For all-in-one verdigris patina finishes, tint the pot with the belief and let dry. For a bit deeper administration, applicability a two-step finisher. Handle the anterior coat of copper stain evenly to the gone and the inside rim of the pot with a brush or sponge. (When delineation the inside rim, embrace to below where you expect the surface of the earth or planting medium to be.) Go after directions for applying the moment belief, which Testament proceed with the replica coat and commence to turn the pot into the verdigris patina of aged copper. This second coat has to be timed right in order for the chemical reaction to take place.


You can vary the finish effect by sponging on the top coat unevenly or applying it with a bunched up, lint-free cloth. Work the top coat into any ridges or decorative scrolls on the planter to bring out the detail.


When the paint dries completely, use clear lacquer to protect the finish or simply allow your "aged" pot or planter to weather in the garden.


Verdigris Ceiling Tiles


Create the look of original tin ceiling tiles but go one better---and cheaper---with paint and plastic. Real tin ceiling squares are expensive, but you can paint a lighter, less expensive version of ceiling tile to look like a rich, aged copper.


PVC tiles embossed with the patterns used in old tin ceilings are available at home improvement stores.

Old Copper Lampshade

An original and rich-looking lampshade is an afternoon's craft project that will give lasting pleasure. Remove the fabric lampshade from its base and set on an empty bottle or jug---a stand that lets you work on the entire shade, including the rim. Center the bottle on sheets of newspaper to protect the work surface.


You can install the tiles at this point or spray with a light coat of clear lacquer for protection.


To further simulate the darkening of age and use, coat the verdigris tiles very thinly with watered-down black lacquer. It's best to test this step on a spare tile to determine exactly how dark you want your final product to be.


Paint them before installing, using a verdigris patina kit or a graduated application of paints.If you elect to create your own patina, begin with a base of metallic copper paint. After the copper coat dries, sponge on a dark turquoise paint in uneven splotches, leaving some of the copper to show through. Let dry and then sponge on a light turquoise paint, once again applying unevenly so the other layers show.


Be sure the lampshade is dust-free before you paint.


Use a faux verdigris paint kit, stroking or sponging the paints on lightly. Cover all the fabric with the base coat, but don't soak it. Apply the second solution unevenly to create a realistic verdigris effect. When the shade is completely dry, spray with clear lacquer so it will be easy to wipe down when dusting. Then glue or tack a border of copper or verdigris hanging bead trim to the bottom rim of the shade.