Rear windows are an primary allotment of a motorcar's structural sincerity and this remains accurate for a Chrysler convertible. Use a dry cloth To cleanse up the area.6. Insert the replacement window in the opening from the outside and have an assistant hold it in position.
Instructions
1. Unfasten the hooks on the convertible top and lift it up a uncommon inches from the back windscreen.
2. Incorporate the plastic window trim Emigration stuff between the ebony trim and the window. Slide it all over the window underneath the trim to seperate the two. Remove the trim by participation.
3. Remove the metal clip in the middle of the window, on the bottom edge, using a flat-head screwdriver. Loosen the other clip from the inside and then remove from the outside.
4. Unzip the window and place it carefully to the side.
5. Remove adhesive residue or debris from the window opening using rubbing alcohol to receive rid of the most persistent bits. As a aftereffect, the back glass needs to be intact at all times so that your vehicle remains roadworthy. The window is prone to damage over duration, mainly whether the top is Often raised and lowered. Replacing the back glass on a convertible differs slightly than a principles vehicle. But, with the maintenance of a classmate and the hold water tools it is a practicable calling.
From the inside, zip the window in place and insert the metal clip in the same place the old one was attached, making sure to replace the support plate. Add double-sided tape over the clip.
7. Put rubber cement along the edge of the convertible top where it meets the window to help hold the trim firmly. Add cement to the edge of the trim and push it into place with the trim tool. Allow at least Day and night for the glue to dry properly.
