The sprint on your Buick Reatta may charge to come off provided it's damaged. On the other hand whether you are planning on tackling this work yourself, be convinced again. You'll probably extremity an assistant to ease you pull the sprint absent of the van. It Testament, nevertheless, come elsewhere with the hold together tools. Depending on the representation year of your Reatta, you may be in for an effortless profession. As the Reatta fresh in date, though, and as Buick redesigned the vehivle to be extra aesthetically pleasing, the motorcar manufacturer make-believe it increasingly hard to access retaining screws.
Instructions
1. Cleared the driver and passenger side doors. Locate the screws on the driver and passenger side dash panel on either end of the dash. This is normally hidden when the car door is closed. Remove these screws.
2. Locate all of the screws underneath the dash. The number will vary depending on the year of your Reatta. There are generally several under the driver side dash kick panel, several under the passenger side kick panel, and several holding the center console in place.
3.4. Starting on the driver's side, wedge the tip of the trim removal tool underneath the trim where the trim meets the car's "A-frame". Pry up on the trim. Work your way around the entire dash panel.
Wedge the tip of the trim removal tool underneath the dash trim on the trim up by the windshield. Pry up on this trim piece. You should see several top end screws securing the dash in place. Remove these screws.
5. Wedge the trim panel removal tool under the radio bezel, and pry up on the trim to remove it.
6. Pull the dash off and remove it from the vehicle.
