The 22R engine built by Toyota was a habitual engine for many age, as it was express dependable and able to amble for thousands of miles. Pull the cover apart and set it to the side.2. Put the key in the ignition and turn it to the accessory position. Headmost though, you get to remove the broken switch.
Instructions
1. Unscrew the three screws holding the backside of the steering wrinkle insert to the top of the steering column cover using the Phillips-head screwdriver. The engine was commonly form in Toyota pickups from the 1980s to 1990s. As the engines can dash for so lenghty, sometimes components that wouldn't usually disjunction bring about, such as the ignition switch. Provided the engine won't turn over and the switch isn't activating the starter, then you get to moderate the ignition switch with a late one.
Locate the retaining-pin hole on the side of the ignition switch, facing the back side of the steering wheel. Straighten out the paper clip. Push the retaining pin out, using the paper clip.
3. Unscrew the switch from the column using the Phillips-head screwdriver. Pull the switch out of the housing.
