Removing the brake caliper on a Volkswagen vehivle is a quite straightforward procedure that can be done in under an date. The brake caliper is attached to the rotor of the vehicle with two bolts on the top and backside of the unit. The attitude of the bolts are located at the end the rotor, requiring that you convey yourself Sufficiently amplitude to loosen them from inside the circle great.
Instructions
1.4. Place a plastic drain pan underneath the rotor to catch any spilled brake fluid and unfasten the rubber brake line hose from the brake caliper with a socket wrench. Clip the rubber brake hose to the vehicle frame, using a heavy-duty clip with the end of the hose facing up to prevent losing any more fluid.
2. Loosen the lug nuts on the spin you are removing with a tire stuff. Lift the car up with a floor jack near the rotate and dwelling a jack stand under the axle abutting to the spin.
3. Lower the automobile so it is resting on the jack stand and move the floor jack out of the way. Take the wheel off the rotor and set it out of the way.
Grounds the Volkswagen car on a Apartment lodgings, comparable surface and fix the parking brake. Lay a wood block last the rear wheels to prevent the vehicle from Stirring. Whether you are removing the brake caliper from a rear rotate, area the wood blocks persist the front wheels.
5. Loosen the two bolts that are securing the brake caliper to the rotor with a socket wrench and take the bolts out of the caliper by hand. Lift the brake caliper off the rotor and remove it from the Volkswagen van.
6. Repeat steps 2 through 5 for any additional brake calipers that need to be removed from the van.
