As soon as you grasp that one of your revolve nuts is loose or stripped, or that you broke the spin stud, compose plans to alter it. When you alter the trundle stud in your Honda CR-V, you close demand a small mechanical bent. You further obligation a commendable awareness or turn schematic and some brute coercion. The employment of replacement isn't extremely hard on the other hand it takes over an day.
This gives you room to remove and insert a new stud5. Hit the head of the stud with a mallet to drive it back through the hub and out. Insert a new stud into the same hole in the hub as the stud you removed.
2. Probation the passenger side contents earth for the jack and tools. They're latest a comprehend you need to remove by turning the handle counterclockwise and pulling. You'll need to also get blocks for the tires when you prepare to replace the stud in the Honda CR-V
3. Jack up the SUV. Take off the wheel. In the front, you need to remove the rotor and calipers. Do the same for the rear if you have disc brakes there. If you have drum brakes in the rear, take off the drum and remove the hub. Put the hub in a vise and skip To pace 5.
4. Look for a cut out opening behind the hub. Line the stud up to this opening.
Instructions
1. Obtain the belonging stud. Provided you aren't persuaded what the true one is, wait until you remove the stud and receive it to the Car parts store with you6. Put two wheel nuts on the stud and tighten them. The action draws the stud through the opening. Check in the back. When the head is flush to the hub, you've seated the stud.
7. Begin the process of reassembly. Start with the last items that you took off to replace the stud on your Honda CR-V and continue until they're all on and you've tightened down the wheel nuts.
