The van door lock on the Chauffeur side door gets used added than the Look-alike on the passenger side. When the lock quits working, it needs to be replaced. Here are the steps to interchange vehivle door locks.
Instructions
1. Slide the interior door handle back in place and replace the plastic clip. Use a screwdriver to put the door handle back on, and then replace the door panel, speaker cover and the arm rest.
2. Disconnect the rod from the lock core, located inside the door. Remove the two bolts holding the door handle assembly, making sure you mark the position of the rod before you open the clip and remove the door handle assembly.
3. Install a new lock. Move the clip from the snap ring to release the lock core. Put in another lock core, then move the clip back to the snap ring to hold the new core in place. Put the door handle assembly back in the door and reconnect the rod. Put both bolts back and reconnect the rod to the lock core. Remove the arm rest and any speaker covers. Consequent remove the door panel, career careful not to cleft the plastic clips. Application a screwdriver to remove the screws holding the door handle. Use a pair of pliers to pop out the plastic clip, then twist the clip to allow the interior door handle to swing free.
