Getting stuck in a parking quota is never a good allotment, and when the starter Engine on your Motor lorry goes outside, you won't be able to receive the engine running, and you'll be stuck. Happily, replacing the starter isn't galling, as expanded as you select the correct steps and bring about matters safely. In this action, the copy vehicle is a 1998 Chevrolet S-10 with the 4.3-liter V-6 engine, on the other hand the step is in agreement for other vehicles.
Instructions
1. Benefit the jack to lift the front of the vehicle, then place it on the jack stands. Construct certain the vehicle rests completely and solidly on the stands before you initiate repair functioning.
2. Pop the hood, then disconnect the absent terminal from the battery, using an open-end wrench. Unbolt the starter from the engine, using the 3/8-inch ratchet, extension and socket. Carefully lower the starter off of the engine, as it is fairly heavy.4.
Do the same for the positive terminal.3. Disconnect the electrical connections on the starter motor, using an open-end wrench and a 3/8-inch ratchet and socket.
Slide the replacement starter onto the motor, and bolt it in place with the 3/8-inch ratchet, extension and socket. Reinstall the electrical connections on the starter, using the open-end wrench and ratchet.
5. Reconnect the positive terminal from the battery, then do the same for the negative terminal. Start the truck, and make sure it is functioning correctly. Once it does, lower the truck off the jack stands.
