Creating a mould, such as a fishing lure, is something you can close by mixing and pouring a fiberglass resin. The fiberglass resin dries to a tough facts that you can then benefit to mould a write of an target. To compose this mould, you duty to pay for the materials that you Testament demand to pour the fiberglass resin to assemble the mould.
Instructions
1. Levy the baking pan on Apartment lodgings surface, such as a table or the counter. Decrease a plenty of laminating paper that is the magnitude of the baking pan. using the scissors.
2. Community the laminating paper along the backside of the pan. The glossy side needs to be face down on the pan, with the adhesive side facing up.
3. Secure the laminating paper to the pan on the edges with a rare pieces of tape. Deposit the oppose that you hope for to mold in the center of the laminating paper.
4.7. Repeat this process for any of your additional fiberglass molds.
Pour the fiberglass resin over the object. The resin should extend at least 1 inch around the mold. Allow the fiberglass resin to dry for at least 2 hours.
6. Place the baking pan upside down on the table or countertop to release the laminating paper from the baking pan. Pull the laminating paper off the mold and remove the object from the mold, if it did not stick to the laminating paper.
Mix fiberglass resin and the activator in a plastic jug by following the instructions on the package of fiberglass resin. Stir the mixture with the wooden stir stick.5.
