You might prefer the eyeful of a custom rocker panel to the plastic episode that comes on the Coincide.
Check under the rocker panel for a pair of screws at each end. These hold the rocker panel to the bottom of the frame. Remove them with your screwdriver and set them aside.4. Aftermarket rocker panels for the 2007 Accord are available from custom reason shops. So provided you prefer the bad eye of aftermarket rocker panels or your inventory panels are damaged, you can remove them yourself.
Instructions
1. Exalt the motorcar using a motorcar jack or turn ramps. This allows you to access the screws on the underside of the rocker panels. The Assent is besides low to the ground to receive a public screwdriver underneath.
2. Stare at the back of the front shove right. There are three screws holding the rocker panel in district. Some models of Acquiesce also have a splash guard held in place by the screws. Remove the screws while holding the splash guard so it doesn't fall off. Set the screws and splash guard aside.
3.Rocker panels on the 2007 Acquiesce are the portion of coloured plastic trim under the doors. They're exclusively for looks and to go underground the backside of the door frame. Sometimes, they amuse damaged by debris kicked up by the front tires or from a accelerated encounter with a curb.
Go to the back wheel well and push on the rocker panel. You might have to use some force. It will slide forward and pop off. Have someone hold the rocker panel or put down a shop towel or folded sheet, so it doesn't break when it lands.
5. Repeat Steps 1 through 4 on the other side.
