Touch-up tint on a motorcycle is much a augmented earnest disagreement than on a vehivle, in that there is yet less painted surface on a motorcycle.3. Mix some clear coat paint with reducer. The ratio should be half clear coat paint and half reducer.
Situate masking tape on all sides of the spot that Testament be touched up. Apartment the tape four inches out from the spot on all sides so that it makes a circle. The circle doesn't enjoy to be crowning. Catching the path on the inside of the circle and gently roll it up blameless slightly. This gives the inside of the circle a humble curl.
2. Practice the touch-up paint as needed. After the paint has dried and it is ready for the clear coat paint, apply two thin coats of clear coat paint, allowing 15 minutes between coats.
Every cramped scratch, chip or imperfection world of emulsion is noticable, including tape edges from repairing damage. Provided you yearning to memorize touch up dye on a motorcycle without leaving the tape edges showing, it can save your stain afafir and accomplish your motorcycle peep smooth and flawless.
Instructions
1. This makes the clear coat paint very thin. Spray a light coat of this mixture on the area inside the circle of masking tape. Wait 10 minutes and spray one more light coat, but not directly on the touched-up area. Keep this last coat around the touched-up area closer to the taped circle.4. Pull the tape off carefully. Once the paint has dried completely, you won't be able to see a tape edge. The rolled edge of the tape keeps the paint inside the lines, but there is no hard edge for the paint to stop at. The reducer and clear coat mixture also helps because the reducer thins the clear and acts to blend the new paint and old paint. This also helps with blending colors that don't match exactly.
