Wednesday, 12 November 2014

Change A Starter Motor Inside A Chevrolet S10 Pickup

The starter motor in your Chevy S-10 pickup serves honorable one service, starting the engine. Lower the tuck to the ground and remove the jack.8. Install the negative battery cable onto the negative battery terminal and tighten the retaining bolt with a wrench or socket and ratchet. Test the repair by starting the truck.



1. Govern the hood of your S-10 and remove the denial battery cable from the battery with a wrench or socket and ratchet. Fix the cable aside and elsewhere from the battery while you grind.


2. Elevate the front of the Motor lorry with a jack then slide a allot of jack stands under the frame rails. Lower the Motor lorry onto the jack stands and remove the jack from under the Motor lorry.


3. Allot the starter under the Motor lorry. It is on the left Chauffeur's side of the Motor lorry near the back of the engine. Fix the two electrical connectors on the rear of the starter solenoid and remove the retaining nuts with a socket and ratchet. Pull the wires off the terminals, creation notice of which wire comes off the "B" terminal and which comes off the "S" terminal.


4. Remove the two mounting bolts at the front of the starter with a socket and ratchet. Lower the starter Engine outside of the engine compartment and fix it aside.


5. Hoist the brand-new starter into position, production undeniable to slide the nose of the starter into the gap in the call housing until it is flush. Install the two mounting bolts into the starter and tighten them to 32 foot-pounds with a torque wrench.


6. Install the electrical connectors on the terminal at the back of the starter solenoid. The large single, red wire attaches to the "B" terminal followed by the retaining nut. The smaller wire attaches to the "S" terminal also followed by the retaining nut. Tighten both retaining nuts with a socket and ratchet. The terminals are marked on the plastic case of the solenoid for identification.


7. Lift the front of the truck off the jack stands with the jack then remove the stands from under the truck. Whether your starter Engine fails, you Testament not be able to begin the Motor lorry and may accept to tow it central. Provided you suspect the starter is failing, remove it from the Motor lorry and hog it bench-tested at an Car parts store. Replacement starters are available late or remanufactured from many Car parts stores.

Instructions