The Suzki Bandit 600 is a comfortable motorcycle suitable for touring and commuting.
The Suzuki Bandit 600 is a general motorcycle, built with an upright seating position to produce it deeper comfortable on far-off rides. Most motorcycle clutches are contrary than ones institute in cars, by reason of they chalk up multiple clutch plates and coerce in a bath of oil. Clutches wear gone over era, meaningful to slippage and erratic engagement during acceleration. The clutch on the Bandit 600 is easily replaced with a meagre basic tools.
Instructions
1. Remit the engine to nipping, benefit the wrenches to disconnect the clutch cable.
2. Levy an oil filter pan underneath the clutch include. Remove the clutch cover bolts, then pry the clutch cover off. The oil Testament extract into the oil pan.
3. Avail the socket wrench to loosen the clutch pressure plate bolts. Loosen them a inappreciable bit at a date in a star example. Remove the bolts and springs and discard them. You Testament exchange them with fashionable parts in a successive action.
4. Remove the clutch vigour plate and locate aside. Remove the clutch plate stack. The stack consists of alternating steel and fibre plates. The fibre plates Testament be replaced with different ones. The steel plates will be reused. Set them aside in the order they came off.
5. Soak the new fiber plates in fresh motorcycle oil for ten minutes. Reassemble the clutch stack. Remember that the first plate closest to the engine is a fiber plate, then steel.
6. Add fresh oil to the engine to replace the oil lost in Step 1. Start the engine and check that the clutch engagement point has not changed. Adjust the clutch cable if necessary.
Use a new clutch cover gasket if the old one was torn when you took the cover off. Install the clutch cover bolts and tighten them to manufacturer's specifications.
8. Reinstall the clutch cable. Install the clutch pressure plate, then install the new bolts and springs. Use a torque wrench to tighten them in a star pattern to the torque specified in the owner's manual.7. Install the clutch cover.
