Createx paints should be thinned according to the type and amount of airbrush or spray-gun gratuity.
Createx manufactures one of the most plentiful lines of airbrush paints and pigments. These products are used by all types of artists. Among their advantages is that the association produces particular additives that can be used in all of its airbrush paints. These additives include two reducers, or thinners, both of which improve flow and atomization.
"5608 Illustration Base" is a milder reducer and is recommended for use at low pressure settings with small airbrush tips. "Wicked W100 Reducer" is a higher-strength reducer that prevents dried paint from accumulating in the tip and forming tip-dry.
Instructions
1. Add the desired amount of Createx paint to the airbrush or spray gun jar. Determine the size and type of tip you will be using for the painting session.
2.4. Repeat process for each additional coat of paint that is applied after the previous coat has dried.
3. Attach the jar to the airbrush or spray gun. Use the reduced paint within 24 hours of preparation.
Add enough Createx reducer to the jar to produce the desired consistency. Mix gently and evenly with a stick. Properly reduced paint should be approximately as thick and smooth as milk.
