Programming your Hummer keyless remote is as easy as a hardly any pushes of the buttons on your remote, and Testament spare you to lock and unlock your automobile doors, first step your vehivle, and manage your Timber remotely. Needing particular a explanation for the vehicle and your keyless remote, the programming manner can be done by anyone and Testament revenue particular a rare light minutes.
Instructions
1. Situate your gloss in the ignition of your vehicle and build positive all of the doors and the Timber are closed before you bias in your vehicle.6. Remove your key and test your keyless remote to see if the programming mode has worked.
Continue holding the "Unlock" button.
3. Turn your key to the left so your car is off, and then turn it on and off one more time, all while holding the unlock button. The horn will then honk, and your doors will all lock, which will signify that the programming mode is active and you can release the "Unlock" button.
4. Press and hold both the "Unlock" and "Lock" buttons on your keyless remote. Hold the buttons for between 10 and 20 seconds. Once the locks have again clicked on the car, you can release the buttons.
5. Turn you key into the "On" position again and then turn it off. Your car's horn will once again activate, signifying that the programming mode has ended.
Act not turn your van on.2. Clasp the unlock Press-stud on your Chauffeur door and turn your key two clicks to the right. Your car will not be started, but it will be in the "On" position.
