Tires that are larger than inventory tires Testament interest the rectness of the speedometer.
Upgrading a vehicle with larger tires is bourgeois among off-road enthusiasts. Larger tires avow you to fling into habitation that would be unreachable with workshop tires and inventory suspension systems. Larger tires achieve gain some drawbacks, but. Larger tires are besides expensive, desire an upgraded guide train to supply adapted relieve and potentially pitch off the calibration of the speedometer. With a tire vastness chart, a late speedometer gear with the Correct tooth count can allot the complication.
Instructions
1. Install the retaining clip and bolt into the transfer case with the ratchet and socket.
2. Locate the speedometer gear housing on the tail side of the transfer case. There will be a retaining clip holding the speedometer gear into the housing. Put on the gloves to keep your hands protected from any potential grease and fluid.
3. Use the ratchet and 1/2-inch socket to remove the bolt that holds the retaining clip to the transfer case housing. Set the retaining clip aside for re-installation.
4. Pull the speedometer gear out of the socket. Grasp the gear with a firm grip and pull the metal shaft with the gear from the housing.
5. Install the new speedometer gear into the speedometer fitting. Insert the gear back into the transfer case housing, being careful to properly align the housing. Marks on the transfer case will tell you Until when to turn the socket.
6. Conclude the apt speedometer gear to replace the stock unit. Charts are available online that will allow you to make the correct choice. The number of teeth on the new gear will be determined by the size of the new tire.
