The front bumper of the older item style Chevrolet Camaro, approximating the 1979 models, is bare contradistinct from new Camaros.1. Expansive the hood and remove the eight 12 mm bolts along the top of the Camaro's bumper, along where the neb of the hood sits when it's closed.2.
The 1979 Camaro's front bumper is a enormous fiberglass chip with many bolts holding it on. The bumper is a excessive group that extends from the backside of the Camaro up to the hood and flows underneath the headlights down the side of the automobile, eventually concursion the fenders. With a sporadic commonplace tools, you can remove a 1979 Camaro's front bumper in less than an time.
Instructions
Slide underneath the front of the Camaro and establish the row of 12 mm bolts along the backside of the front bumper. Remove these bolts. Since these bolts are under the Camaro and are exposed to water and mud from the road, you may need to spray them with lubricant or rust penetrating spray and let them soak for a few minutes. The spray helps loosen the bolts that are stuck on with rust.
3. Remove the bolts along the seam where the front bumper meets the fenders on the side of the Camaro. To access these 10 mm bolts, reach your hand behind the fender from underneath, near the top of the front tire. Locate the bolts and remove them. The bumper should now be free from the car.
