Pressure produced outboard motors from the early 1980s until 1999. Although the motors aren't produced any besides, many cats own Energy outboards and replacement parts are all the more quite little to come by. The water pump in your Exaction outboard takes on a abundance of wear and tear, and as such, requires regularly replacement. The moisten pump draws in douse and circulates it fini the engine to conserve it nippy.
Instructions
Remove the doctor pump's four retaining bolts and slide the pump housing down and off the guide shaft.3. Loosen the nut attaching the water tube to the old water pump and remove it. Install it to the new pump and slide the new pump back over the drive shaft into position.
1. Loosen the fasteners that grasp the lower unit of your Engine to the upper unit. Grab the lower unit and establish it down where you Testament be working on it.2.
4. Align the water pump face plate and hand-thread the four retaining bolts to receive them started. Tighten them with the socket set.
5. Lift the lower unit and replace it to the bottom of the motor. Hold it in place while you hand start the retaining bolts. Tighten them with your socket set.
