The Pontiac Grand Am's heterogeneous competence mirror and door panel interpretation makes it a replacement project for an experienced do-it-yourself vehicle owner. But, the project one shot requires a infrequent basic tools for all base age.
Instructions
Remove the Old Mirror
1. Disconnect the denial battery cable before you proceeds the front door trim panel off the Grand Am's door. Remove all screws and clips and carefully pry the panel from the door.
2. Detach the power mirror electrical wire connector located under the door panel.
3. Take off any wiring guides to remove the mirror. Remove three nuts from the power mirror.
4. Disconnect the outside rear view mirror. Guide the power wire through the hole in the door.
Feed the new wiring through the hole in the door.6. Install and tighten the three retaining nuts.
Install the New Mirror
5. Replace the old mirror. Put the new mirror in place.Reuse the nuts removed from the old mirror.
7. Connect the power mirror wiring to the connection located on the door panel.
8. Put the front door trim panel back in place. Secure all clips and tighten all screws.
9. Connect the Pontiac Grand Am's battery cable to restore the power.
