Can this sound more appropriate?
Your muffler drowns your engine's sound to low levels. Replacing or modifying your exhaust main can drastically chicken feed -- and repeatedly embroider -- the sound of your exhaust transaction. There is another course to enlarge the sound of your exhaust pipes without replacing them. Call a channel expanding thing. Instead of adding a pricey Element, expand and quarters the shape of the exhaust channel. It Testament alternate the sound analogous hang-up the manage point of a trumpet does.
Instructions
For ramps, settle a rise at the back of the motorcar, behind the rear wheels and carefully drive to the top of the ramp. If you prefer to use jack stands, jack the car up with a bumper or floor jack from the rear and place the jack stands underneath the vehicle in locations that are safe for your vehicle. You should consult your user's manual.1. Hoist the rear of the vehicle on a equable surface. Country it on jack stands or ramps. Use bricks or blocks on the front wheels to prevent the car from rolling.
2. Insert the pipe expansion tool up to the desired length. If you want the wider pipe to be one inch in length, insert the expansion tool in to the pipe one inch. If more is desired, insert the expansion tool to a greater depth. Usually two to three inches will be sufficient. Using either an open-ended wrench or a socket wrench with the correct size, begin to rotate the bolt endure of the expansion tool clockwise.
3. Stop rotating the bolt ultimate of the expansion tool when you reach your desired diameter; when it looks wide enough to you, stop using the expansion tool. Rotate the bolt behind of the expansion tool counterclockwise until the expansion tool can be removed.
4. Reverse the setup process to complete the task. Reattach all removed components. Lower the vehicle down from the jack stand or ramp.
5. Start the vehicle. Listen to the sound the exhaust pipe makes. A deeper sound can be made by widening the tailpipe further.
