Proceeds a Stuck Parking Brake
In many vehicles, the parking brake can gratify stuck whether left busy for a far-off time of hour, or whether subjected to overzealous handle. Provided you air the unmistakable drag of a seized parking brake when you're in your vehicle, bid to bias the point and agency of the preserve. There may be rust or corrosion, and problems can materialize in the cable, the lever or the brake meeting.
Instructions
1. Agitate the brakes physically by applying and releasing the brake a cipher of times. Or shift alternately into coerce and reverse to lurch the vehicle back and forth. Maneuver two screwdrivers through the access port on the drum brake backing plate to loosen the tension adjuster screw. Remove the drum and replace the brake cable, brake shoes and return spring, as necessary. Refer to your vehicle service manual to find the detailed procedures for your specific model.
Remove the circle to accrual access to the seized brake. Return care not to damage any parts as you tap the brake assembly with a hammer to free the pads from the disc or drum.
3. Test the parking brake cable to see if it is broken or stuck. Release the cable from the rear passenger side brake caliper and try to free up the cable movement with a penetrating rust remover, or if necessary, replace the cable.
4. Or bounce the motorcar up and down near the seized turn.2. Benefit the vehivle securely on a jackstand. Reassemble the brakes, lower the jack, and test the brakes.
