When removing gloss from a automobile, disquiet must be taken to prevent the paint from lifetime damaged.
Removing 3M tape from an van is a two manner manner. The anterior manner involves removing the tape. Unfortunately, no event what you effect, there's always the opportunity some of the whitewash can come off with with the tape, although working slowly and carefully can contract some of the risk. The moment step involves removing any adhesive left at the end, and you may commitment to repeat it various times.
Instructions
1. Soak a rag or cloth in drool as blistering as you can stand to touch. Levy the cloth over the tape, focusing on the contour. Permit the cloth in distance until the cloth begins to nippy. The heat loosens the adhesive used on the tape.
2. Custom a plastic razor blade or a plastic stain scrapper to gently lift the limit of the tape. Allow it to work into the residue for one to two minutes. Dampen a cloth in cool to room-temperature water. Wipe the area to remove the tape residue and adhesive remover.
3. Shake a can of 3M adhesive remover. Spray on the tape residue. Effect not adoption metal, as it Testament scratch and damage the whitewash. Once the edge is lifted, slowly peel back the tape. Do not peel quickly, as you can peel the paint off with the tape. Repeat Step 1 as needed, until all of the tape is off. Repeat as needed until all residue is removed.
4. Fill a bucket with warm water and liquid dish soap or car washing soap. Dip a sponge in the soapy water. Clean the area of the car where the tape was placed. This ensures all residue from both the tape and the adhesive remover is removed. Rinse the area to remove soap residue. Towel dry to prevent water spots.
