The Ford F150 is the most accepted Motor lorry sold by Ford. Coat the frit band with urethane primer. The frit band is the black strip-edge running around the perimeter. The band has to be activated to open up the pores so that the urethane can adhere to the glass. Once the Windscreen has been removed, you'll must to sense install a windscreen in a Ford F150 properly so that it seals.
Instructions
1. Disinfected up any residual urethane after removing the aged windscreen with a razor blade. Section the ancient urethane down to approximately 3 mm.
2. Clean the pinchweld area on the F150 where the new windshield will be installed. Gently brush the area with a cleaning brush. Use water and clean rags to dry the area.
3. It's considered a heavy-duty Motor lorry, meant for hauling and towing. Through of this, it should be no surprize that over hour, it Testament accumulate its unprejudiced ability of dings and dents. Stone chips in windshields are typical among vehicles that are used for hauling, towing and other heavy-duty applications. But, when a stone chip turns into a crack, it may be allotment to moderate the plentiful windscreen before it spreads, shatters and makes a mess sorrounding the inside of the Motor lorry.
4. Run a bead of urethane into the pinchweld area on the Ford F150 where the windshield will be placed using an electric caulk gun.
5. Align the top, bottom and sides of the windshield and press the windshield into place.
