As vehicles generation, parts shop for older and open to collapse. This will remove the edge seal of the window; place it to the side. Pull off the remaining window trim on the door, by pulling down on it and working your way around the window.4.
Instructions
1. Yawning the door and roll down the window all the form. You necessity the window to be as absent of the design as viable, to allow you lots of working extent.
2. Unbolt the rear prospect mirror using the 3/8-inch ratchet and socket allot. Community it to the side. Depending on the base of truck that you own, you may have to unplug a harness for the power mirrors using your hands, and pull off a decorative piece of trim using your hands further.
3. Step outside of the vehicle and place your hands on the bottom ledge of the window, and then pull up on the seal. The rubber seals sorrounding the window and in the door jams are typically the first off to moxie, as they bias brittle with date and deteriorate quickly. Replacing these seals isn't a crucial deadweight, however it can be a bit tricky provided you've never done it before. In this plight, the vehicle is a 1999 Toyota Tacoma, however the action is akin for other vehicles besides.
Place the rear section of the new window rubber (the section closest to the back window). Push it down into the window channel to set it in place. Work the window rubber around the window, following the curves of the truck, until you push the last half into the forward window channel. The rubber will have curves in it to match the curves of the opening; use that as a guide.
5. Clip the replacement window channel in place on the window sill by pressing down on it, clipping it in place. Then reinstall the mirror using the 3/8-inch ratchet and socket set. Roll up the window to check for proper operation.
