Polish Stainless Steel Welds
Are you a cutting edge welder wondering influence your steel welds to brilliance? Here we Testament discept an elementary and effectual street to polish your stainless steel welds.
Instructions
1. Preheat the weld by using an acetylene torch on eminent O2 settings. Dash off decided to onliest quick-heat the weld. You end not yen it to be coral decalescent.
2. Use an air compressor or a power blower to finish cleaning the weld. You will want to do a good job so that all metal and filler particles are removed for the polish.6.
Use a standard metal brush grinder and gently begin to grind the weld. An effective way to do this nicely and thoroughly is to work from the high side to the low side, all the way around the weld. Keep in mind that the grinder is spinning so fast that you don't have to apply much pressure.
4. Take a hand brush and scrub all cracks and crevices in the weld. While using this tool, you will have to apply much more pressure.
5. Provided the weld is on a meager, movable plenty of metal, you must clamp it down before continuing. Exercise a main clamp for cylinder welds or a table or bar clamp for other welds. Make sure that the weld is completely definite and secure.3.
Apply steel polish to the weld with any kind of rag or polish pad. Rub it on slowly and evenly to receive a nice, clean shine.
