Automobile window molding is replaceable.
Machine window moulding is untrue of synthetic rubber; after a rare senility of frequent employment it starts to crack and date. The rubber much becomes dry and less competent in insulating your vehicle. Moreover, the moulding may break ground to slide off the inside of the door frame, causing the windows to shut with disagreement.
Push the molding into the frame in this way working all along the frame until the entire piece is in place.5. Roll up the window carefully making sure the window runs into the seam of the molding when closed. If not, remove the molding and reinstall it so the molding seam is centered.
Remove the existing machine window molding by inserting a Apartment lodgings head screwdriver into the molding seam and gently prying it off the vehicle. Once the molding is pried up at one end, it will be easier to remove the entire strip at the moment with your hands. Pull the molding off carefully once it gets started.
3. Grasp the new molding with your thumb and forefinger and pinch the locking strip sides together. These are the two notched edges on the outside of the molding.
4. Press the molding edge into the door window frame until the locking strips "catch" and hold themselves in place.
