Removing the clutch cable from your motorcycle, either for replacement or preservation reasons, is a straightforward case. Loosen the adjuster slightly, provided needed.3. Remove the cable edge barrel from the clutch lever and pull the cable fini the cable grooves on the pole and adjuster. Then slide the clutch cable through the front fork's cable clamps.
Establish the cable accustoming peanut at the centre of the cable and tighten it completely. This Testament accrual the cable slack at the clutch lever.
2. Loosen the lock aficionado on the clutch lever cable adjuster and tighten the cable adjuster until it is seated against the clutch lever Pole. Range the cable groove in the adjuster with the cable groove on the Pole. Although there are toddler differences in objective or arrangement between the multitudes of motorcycles, the basic belief is the duplicate. You Testament obligation a minor crowd of participation tools, including a locate of screwdrivers, combination wrenches, a socket wrench, and a allot of sockets (metric or sample SAE, depending on the build and representation of your motorcycle).
Instructions
1.4. Access the cable adjuster on the motor. Depending on the model of your motorcycle, the adjuster may be hidden behind a plate or cover. If needed, remove the cover to gain access to the adjuster.
5. Loosen the lock nut on the engine side adjuster and twist the adjuster counter-clockwise until the adjuster is completely unscrewed from the clutch release. Pull the exposed inner cable through the groove on the clutch release and pull the end barrel from the clutch release's catch.
6. Remove any brackets or clamps that may be securing the clutch cable to the motorcycle's frame and pull the cable free.
