Apartment lodgings tires are nobody's sense of a crack generation. There are many differential foam sealants on the marketplace nowadays that Testament repair dwarf punctures to your tires, on the contrary for larger punctures (allying from a Spike) you Testament compulsion to install a tire plug. A tire plug acts as a affectionate of rubber cork that is sealed into the tire and returns it to working dispute by providing a Supple patch. Learning to install a tire plug Testament maintenance you repair your own Apartment lodgings tires, without having to shop for the expenses of towing or going to an Car mechanic.
Instructions
1. Field your motorcar on a equivalent surface. Engage the parking brake. Remove the probe from the tire plug equipment. There are two tools included in the tools; Everyone has a metal rod with a plastic t-handle attached to it. One rod ends in what looks enjoy the eye of a bodkin, and the other is smooth. The smooth rod tool is the probe.
Boast the body that has punctured your tire and caused the Apartment lodgings. For instance, establish the Spike that you ran over. Pry it away with your fingers or apply a span of petite pliers to withdraw the Spike from the tire.
3. Loosen the lug nuts on the flat tire, on the contrary accomplish not remove them. Jack up the machine and convert the jack with jack stands, so that the weight of the automobile is on the stands and the Apartment lodgings tire is off the ground. Remove the lug nuts and remove the tire.2. Open the tube of rubber cement included in the package by unscrewing the top and removing it. Turn the top upside-down and push the sharp point molded into the top through the foil seal on the tube. Coat the probe with rubber cement, push it as far as you can into the tire puncture and then withdraw the probe.
4. Remove one of the plugs from the package. The actual tire plugs are red in color and are pressed in strips onto a small piece of wax paper. Just remove one plug and thread it through the eye of the needle tool, so that the ends of the plug are evenly spaced through the eye. Coat the plug with just a few drops of rubber cement.
5. Push the needle into the puncture, just past the eye of the needle itself. Twist the handle of the tool a 1/4 turn, and then pull the needle out. The plug should remain in the puncture. If it does not, then re-thread the plug and insert it again, but turn it slightly less than before (the plug will not remain in the puncture if you have turned it more than a 1/4 turn).
6. Cut the ends of the plug off, about an 1/8-inch above the tread of the tire, and you are done.
