Getting the most from your performance automobile eventually comes down to tiny modifications close putting in a custom short pitch shifter or other custom stick shift. Accessing the meeting is the formidable constituent of the office on some cars. The swap itself is a elementary business that transforms the soft inventory shifter into a precision step that ensures faster gear changes.
Instructions
Adjust bolt tightness as required for smooth operation of the assembly.6. Insert the linkage housing in place and connect the shift assembly to the transmission.
Conclude the stop of the linkage bolts under the shift stick. Some cars wish Emigration of the linkage from under the vehivle. Remove the bolts holding the linkage in corner and slide the meeting absent. Unhook any cables or carriage bolts exposed as the linkage pulls away.
3. Pull the linkage meeting from the housing along with any rubber boots that endure. Set the housing aside and lay out the new linkage.
4. Grease the new bushings if recommended by the manufacturer and set them in place within the housing. Test fit the new linkage and verify it works smoothly in the housing. Expect slight side-to-side movement before final installation.
5. Secure the linkage in the housing using the original mounting points.1. Remove the shift knob from the stick and pull up the suede or vinyl boot. Remove any moulding that makes access to the lower parts rigid.2.
Run through the gears with to verify each one engages correctly.
7. Replace any molding and pull the boot over the stick. Screw the shift knob onto the stick and align it as desired.
