Remove Moisture From Welding Rods
A welding rod coating creates a shielding Dross for the weld puddle, providing Safeguard for the weld against porosity. When the rod coating absorbs moisture, it Testament acquire adverse belongings on the Ending weld. The rod coating flaking from the welding rod and Exorbitant spatter are both signs that there is moisture in the rod coating. Beyond these outward signs, the structural incorruptibility of the weld is further compromised, as the moisture laden rod coating Testament grounds damaging weld penetration and cracks in the weld. Equitable three hours of exposure to the atmosphere can beginning these types of adverse baggage.
Instructions
1. Collect welding rods that posses been exposed to air for three hours or amassed.
2. Consult to the welding rod drying chart to arbitrate the Correct temperature to allot the oven to dry the rods (eye Means below).
3. Turn the arm on the front of the rod oven to yawning the oven door.
4. Fix the loose welding rods onto one of the wire shelves inside of the rod oven. Accumulate the welding rods in a unmarried row. Close the rod oven door and turn the handle to latch the door closed.6. Turn the oven temperature to the setting recommended on the rod drying chart for the welding rod you placed in the rod oven.
Arrange not stack the rods on top of Everyone other, as they Testament not slap evenly. Distribute the welding rods on extra shelves if necessary.5.
7. Allow the welding rods to remain in the rod oven for the time specified on the rod drying chart. Do not allow the rods to sit for longer than the specified time, as this will cause the rod coating to become fragile.
8. Put on the leather gloves and remove the dried welding rods from the rod oven after they have set in the rod oven for the appropriate time.
