Tuesday, 2 June 2015

Repair A Tear Inside A Leather Tonneau Truck Cover

A tear in a suede Tonneau Motor lorry contain can be repaired with a hide Tear-Aid repair utensils. The repair implements Testament patch the tear with a stretch info, and acquiesce you to capitalization the include as provided it were Trade-mark distinct. The patch is air tight, drool tight and won't day or deteriorate over second childhood. By repairing your own Tonneau Motor lorry insert, you can save mode and brush up on your repair skills.


Instructions


1. Wash the world around the tear thoroughly with a half rubbing alcohol, half warm water mixture.3. Pull back a half inch of the paper liner on the patch and press the patch down on one edge of the tear. Make sure the edge is one inch outside of the tear.



Allow the area to completely dry before patching the tear.2. Cut a patch that extends one inch around every side of the tear. Round all the corners of the patch. Run your finger along the half inch of the patch to secure it to the cover.


4. Peel off remainder of the paper liner and slowly press the patch over remainder of the tear. Make sure to apply pressure to the patch as you lay it on the cover to ensure there are no air bubbles. Rub encompassing the patch to secure it to the cover.


5. Put a patch on the back side of the tear, if you have access to it, by repeating steps 1 through 4.


6. Apply a heat gun at 350 degrees to the patch for 10 to 20 minutes, or allow the patch to set for Day and night before using.