Yet in a luxury automobile close the Hyundai Sonata, the superiority of the brakes is priceless. Replacing a cut adore the brake caliper is not an facile occupation. Provided you end not gain the scholarship and skill to perform this method licence, sufferance it to an Professional mechanic.
Instructions
Replacing the Caliper
1. Remove the tire and turn once the vehicle is securely raised on the jack. Whether you're replacing a rear caliper, Proceeds the parking brake and block the different tires beforehand.
2. Disconnect the brake hose from the caliper and remove the brake pads. Plug the hose with a quota of rubber so dirt won't influence into the brake fluid.
3. Unscrew and remove the caliper mounting bolts. The caliper should now lift off the rotor or bracket and slide off the pin.
4. Install the new caliper onto the mounting. Attach the mounting bolts and torque them between 59 foot pounds and 74 foot pounds.
5. Connect the brake pads and the hose to the caliper. Use two new metal gaskets with the hose and torque the union bolt to between 18 foot pounds and 22 foot pounds.
6. Bleed the brake system. Because all Sonatas come with anti-lock brakes, this process is more complicated than with other vehicles.
Bleeding the Brake System
7. Connect a clear plastic tube to the bleeder plug on the wheel cylinder and insert the tube's other end into a clear plastic bottle half-filled with brake fluid.
8. Wait one minute before you begin the air bleeding to avoid damaging the motor. Pump the brake pedal several times, loosen the bleeder screw until fluid starts running out without bubbles and then close the screw.
Select the "Hyundai vehicle diagnosis," the vehicle name and the anti-lock brake system. Choose the air bleeding mode, then press "yes" to operate the motor pump and solenoid valve.
10. Connect a Hi-Scan Pro device to the data link connector underneath the dash panel. Follow the instructions on the Hi-Scan screen.9.
