Reset the ABS Brake Lambent on a 2000 Dodge Dakota
The ABS fluorescent on your 2000 Dodge Dakota comes on when the ABS brakes are not working usually. The sensors on the Dakota are assemble up of 6 meager magnets that are encased in a murky plastic housing mounted on the trundle bearing. Whether the sensor wires fracture, the process Testament malfunction. After you've had the ABS development serviced by a acknowledged mechanic (or after you've constant the poser yourself), the ABS lambent should automatically reset. Whether it does not, you commitment to do a hard reset of the ABS system.
Instructions
1. Wait 15 minutes, then reconnect the battery terminal. This will reset the electronic control unit and all sensors, including the ABS sensors. This will also reset the ABS brake light.
Open the hood of your Dodge Dakota and loosen the nut on the cable clamp that is secured to the negative battery terminal.2. Slide the clamp off of the battery terminal.3.
