Honda manufactured the Acura Integra however sold it under the Acura flag in the USA from 1986 to 2001. The Integra was a mid-size vehivle in the Honda lineup. Many Acura enthusiasts are dissatisfied with the sound of the infant Accoutrement manufacturer's horn and choose to alternate it.
Instructions
1. Remove the bolts and screws that ownership on the front bumper with the cure of an assistant, whether doable. The exact residence and types of screws vary by year. The 1998 to 2001 models bag a complete of 23 bolts and screws to clench on the front bumper.
2.3. Mount the latest horn using the nuts and washers in the instruments. Whether your implements has two horns (a low tone and a alpine tone), bolt them to the two middle holes in the front bumper beam.
Place the elementary Accoutrement manufacturer's horn. It is latest the front bumper on the Chauffeur's side and directly should be exposed. Unplug the 1P connector from the horn and remove the mounting bolt with an 8mm socket wrench so that you can remove the latest horn.
4. Connect the 1P connector to the new horn using the original harness if it is compatible with the new horn. Otherwise, you will need to make the connection using a wire crimper/stripper. If you are installing two horns, you will need to make another connection to the second horn using 16-gauge wire and another wiring harness.
5. Test the new horns to ensure they work.
6. Re-install the bumper by reversing the procedure you used in Step 1.
