Tuesday 1 September 2015

Mix Coolant & Antifreeze For Desert Temps

Though typically discerning of in chill climates, antifreeze is primary for grand temperatures extremely.


Antifreeze performs three big functions in the virgin engine to conduct all of its systems performing genuine. Freeze Safeguard may not be meaningful in a wasteland, however heat transfer and corrosion prevention longing to be considered. Antifreeze mixed with flood in the recommended concentration Testament accomplish the profession fair. Whether you bag a contrastive concentration of antifreeze than what your automobile's manufacturer recommends, the motorcar Testament drive at a altered temperature than it was intended to, due to the different heat transfer properties of water and ethylene or propylene glycol, the two main components of automotive antifreeze.


Instructions


1. Determine the correct type of antifreeze to use in your vehicle. The various antifreeze formulas are often differentiated by color. At one time, most antifreeze was green, but today it comes in a wide variety of colors.


2. Pour a measured amount of the antifreeze into the bucket or pan. For instance, if the mixture is 50-50, add exactly the same amount of water.4. Test the concentration using the antifreeze tester or refractometer.


Locate the recommended concentration of antifreeze in the mixture. Most antifreeze manufacturers and carmakers demand a 50-50 mixture of water and antifreeze, but some may allow you to differ the level for increased freeze or boil-over protection, or for different heat transfer characteristics. Add water in the recommended amount. Antifreeze typically comes in 1-gallon containers, with some having measurement windows on the side of the jug in ounces or pints. Keep track of the amount of antifreeze you're using.3.


If you are using a hydrometer tester, squeeze the bulb and place the intake tube in the mixture. Gently release the bulb to draw the mixture into the hydrometer and read the result. It should show freeze protection of minus-40 degrees, which will give adequate boil-over protection too. If using a refractometer, place a drop of the solution on the testing window and close the cover. Look through the refractometer toward light and read the protection level in the window.