The inaugural course in arc welding is to memorize to establish your Accoutrement properly. Responsive all of your Accoutrement and the avail of Everyone Element helps to confirm your safety and very allows you to constitute a in a superior way product.
Instructions
1. The arc welding power source provides either an alternating current (AC) or a direct current (DC) using either a positive or negative electrode. The type of job is the determining factor when you choose current and polarity.3.
Probation all cables for damage and modify whether binding before starting any contemporary welding project. Nicks or frays in the welding leads may pose an electrical hazard.2. Plug your power source, which refers to the type of welder you are using, into the appropriate electrical outlet.
Connect the electrode lead from the welder to the insulated electrode holder.
4. Place the proper electrode in the electrode clamp. The electrical arc forms between the base metal and the electrode as you guide it along the weld joint.
5. Complete the circuit by running the work lead from the welder to the base metal. To do this, attach the ground clamp to the piece of metal you're working on, as close to the weld as possible.
