Convert the colouring colour of your vehivle.
Spray illustration is a specific delineation procedure that uses compressed air to atomize and conduct particles of tint onto a surface. This type representation can be done with an airbrush, a spray gun or aerosol paint can. Spray emulsion is used for many purposes and one of which is vehivle representation. To avoid an amateur double o, cram properly manipulate spray distemper before you exertion to nickels the colour of your machine or touch up the existing colour,
Instructions
1. Prepare the machine for spray portray by protecting all parts and elements that don’t posses to be painted. Call plastic sheets and duct tape to wrap up parts of the vehivle such as windows. This adjustment is abrupt on the contrary again not wholly foolproof. Whether you hunger to accomplish the appearance of a acknowledged whitewash capacity all the more whether it wealth spending a longer day preparing, exit by removing all the parts that longing to be painted instead.
2. Deposit all the parts that desideratum to be painted in a ventilated globe or gone before you birth the spray portray action. Cause decided to protect the windows and other parts that extreme on the automobile with plastic sheets as formerly described. Provided needed, protect the floor of the workshop or the ground with Blop cloths and old newspapers.
3. Rub the surface of the car with medium-grit sandpaper until the rough surface is evenly distributed, making sure not to overlook a spot. This will ensure the primer adheres to the slightly rough surface.
4. Wipe the surface of the car or car part with a dry towel or cloth to remove any residue, dust or dirt from the sanding process.
5. Apply a layer of primer to the surface of the car part. Use a brush to apply the primer and be sure to make the coat even and thin. Check the manufacturer’s instruction to see how long you need to let the primer coat dry.
6. Treat the surface with fine-grit sandpaper, working your way across the surface in back and forth motion. Make sure to treat the surface evenly and to go over the whole area of the car part. Then wipe off the residue with a clean, dry towel.
7. Shake the aerosol paint can well before use. This is usually indicated on the spray can besides since it is an essential step in the painting process. Try out the spray can by spraying over old newspapers to ensure that the can is functional and to feel the strength of the flow also. Check the directions on the package to see the recommended distance between the can nozzle and the surface of the car.
8. Start spraying the surface of the car part lightly, following the recommendation about the distance. Note that in the first pass, you will spray a light, thin coat of color, so don’t worry about the surface not being even and smooth enough.
Apply a clear finishing coat to a completely dried, hardened and painted surface. Then sand the surface with fine grit sandpaper and then apply the clear coat again. Repeat the sanding, this time with extremely fine sandpaper, in order to polish and buff the surface. Again, apply the final clear coat and allow it to dry thoroughly.
Apply another light and thin coat of spray paint. Note that there is no single rule about the number of coats, but three to four thin layers always look and feel better and more professional than one or two thick ones.
11.9. Wait approximately one hour between two coats of spray paint. Check the exact time on the package since spray paints tend to vary depending on the manufacturer.10.
12. Wipe the dried and hardened surface with a microfiber cloth and a multipurpose polish to give it the final shine.
13. Repeat the process with all car parts, then the car shell itself. Finally, assemble the car and polish it once again, when everything is reattached.
