You don't keep to catch your vehivle to the mechanic to preserve your brakes' slide pins.
Up thrust the cusp of your vehicle with a jack and call the tire iron to remove the tire and shove meeting.2. Pry elsewhere the caliper slide pins with a screwdriver and hammer. Strike Everyone side of the pins until the tabs clear the caliper and the bracket. Make sure to drive the pins toward the center of the vehicle. Once the brakes are disassembled Sufficiently to endeavor on the slide pins, greasing the pins is a lucid burden.
Instructions
1.Worry the slide pins maintained properly can drastically doctor up the dash of your brakes pads and rotors. Slide pins grant the brake caliper to drift whenever coercion is applied to the brakes and when the coercion reduces. Provided the slide pins are not maintained and greased properly, they Testament stick and author Exorbitant wear to the brake components. Tears and cracks in the boot can let irrigate and dirt enter and the grease becomes contaminated and no longer acceptable.
3. Remove the caliper assembly and place it safely out of the way without it dangling from the hose.
4. Clean the slide pins and the grooves in it with a rag and brake cleaner solvent. Make sure there are no burrs or caked-on grease in the grooves.
5. Lightly coat the slide pins and their grooves with brake caliper grease. Make sure the coat of grease is very thin.
6. Replace the caliper in the bracket and insert the top slide pin with the narrower end toward the top. Insert the lower pin with its narrower side pointing down. Drive the pins until the tabs pop out the back side.
7. Pump the brakes To erect pressure and seat the assembly. Bleed the brakes to remove any air buildup.
8. Reinstall the tire and wheel assembly and repeat the same process on remainder of the slide pins.
