Transform a Wiper Motor in a Blazer
Over bout, the wiper Engine in a Chevy Blazer may burn absent from usual applicability, or it may suffer an electrical short. On the Blazer, the Engine typically decent burns absent from application. Replacement motors can be purchased from the Chevy division of Accepted Motors or from most Car parts stores. Cognize the year of your Blazer so that you inspire the fair Engine.
Instructions
1. Disconnect the negative terminal on the battery. Loosen the retaining follower on the refusal cable clamp and lift the clamp off the antagonistic terminal.
2. Remove the screws on the cowl of the Blazer at the pattern of the windscreen on the outside of the vehicle. Some model years use several bolts instead of screws to hold the cowl in place. Remove the cowl.
3. The motor is secured to the firewall.5. Pull the motor off the firewall and install the new wiper motor.
Remove the electrical connector through the cowl opening that is connected to the Blazer's wiper motor.4. Open the hood and remove the mounting bolts on the wiper motor.
Installation is the reverse of removal.
