Remove & Install a Starter on a 1996 Toyota Corolla
5. Tighten the starter mounting bolts to 29 pound-feet with your torque wrench. Replace the two wires onto the posts of the starter and secure them with the nuts. Tighten the nuts on your Corolla's starter with a wrench.
Instructions
1. Up thrust the hood of your Corolla. Unscrew the wing devotee securing the air cleaner meeting to the top of the engine. Lift the air cleaner outside of the plan and establish it aside.
2. Remove the nuts securing the electrical wires to the starter Engine using a wrench. Two nuts secure the two seperate wires. Fix the nuts aside for use later.
3. Remove the lower mounting bolt from the starter body with a wrench. Support the starter motor while you remove the upper mounting bolt with a wrench. Pull the starter motor out of the engine compartment.
4. Insert the new starter motor into the engine compartment, lining it up in the same orientation as the one you removed. Insert the upper mounting bolt on your Corolla's starter and tighten it with a wrench. Support the new starter motor while you insert the lower mounting bolt and tighten it with a wrench.
When the starter gives outside on your 1996 Toyota Corolla, you may launch to combat intermittent hesitations when you endeavor to begin the automobile. Whether the starter clicks and does not engage, that is a exceptional comment that it is failing. Transform the starter when you open to note episode to avoid unabridged failure, which would disable your machine. Invest in a replacement starter for your Corolla at an Car parts retailer and transform it Homewards to save reward.
6. Replace the air cleaner assembly and tighten the wing nut to secure it. Close the hood and test the starter.
