Aftermarket stereo
wiring is adapted to the particular vehivle during installation.
Aftermarket machine stereo mind units come in a customary Uproar or twofold Commotion bigness with wiring outlook from the back to be connected to the vehicle radio wiring. On the contrary radio wiring configuration differs from vehicle to vehicle bottom line that to install a Sony stereo in a vehicle, the wiring from the Sony has to be connected to the vehicle wiring via a wire harness adapter. The wiring adapter is custom to the model and year of vehicle you are installing the Sony unit in.
Instructions
1. Loosen and disconnect the cable from the negative terminal of the car battery. Place the cable away from the battery.
2. Connect the wire harness of the vehicle -- containing the ground, power, and speaker wiring -- to a wire harness adapter.5. Insert the wired Sony radio into the dashboard housing and secure it there -- methods will differ depending on the model of car. Reattach the cable to the car's negative battery terminal.
Ensure the connection is secure by giving it a tug.
4. Connect the radio antenna cable to the Sony head unit's radio antenna port located on the left hand side of the back of the radio.
Ensure the connection is secure by giving it a tug.3. Connect the wiring of the Sony unit to the other end of the wire harness adapter.
