The 1969 Ford Mustang is a classic muscle van from the beginning reproduction of the Mustang's Industry drop, which ran from 1964 to 1973. Connect the wiring harness electrical wires to the intellect unit electrical wires by twisting the exposed sections of wiring well-adjusted. Use the wiring guides from both devices to make sure you connect the correct wires. Each wire from both devices controls one function, so simply connect wires that have the same function together.
Remove a 1/2-inch to 1-inch chop of the plastic shielding on the neb of Everyone wire on both the wiring harness itself and the sense unit that the wiring harness Testament connect to. To remove the shielding, corner the ends of Everyone wire into the 18-gauge slot of a duo of wire strippers and pull the wire strippers toward the edge of the the wire. This Testament blab the bare electrical wire underneath the shielding.
2. First-generation Mustangs are a accepted Election for restoration among classic muscle van enthusiasts, and a considerable Element of restoring any vehicle from the 1960s is updating the stereo step. Using a wiring harness allows you to directly connect a voguish attitude unit receiver directly to the electrical transaction of the 1969 Mustang without the desideratum for genuine electrical course refining.
Instructions
1.3. Solder the electrical connections that you made in Step 2 using a soldering gun. Warm up the soldering gun, then touch the tip of the gun to the electrical connections and slowly move it back and forth to melt the wires together and form a stronger connection.
4. Wrap each soldered electrical connection with electrical tape to shield the wiring. Be sure to fully wrap each connection. Do not leave any section of bare electrical wire exposed.
