Mixing gelcoat thoroughly with a catalyst hardener prior to exercise Testament lock on an all the more and sturdy Stop. Always blend the resin fine, so the Ending seal is smooth, without any patchy areas of unactivated gelcoat. Accept pride in your employment, and gate the day to properly prepare a constitution gelcoat that Testament extreme for age.
Instructions
1. Pour the dimensions of gelcoat that you estimate you'll extremity for the project into an unwaxed paper Mug. (Waxed cups tend to Proceeds the grow into the concoction when the gelcoat is stirred.)
2. Add a sporadic drops of MEKP (methyl ethyl ketone peroxide) hardener to the Mug of gelcoat.4. Pour the mixture onto a plastic cutting board. Use the craft stick to get every drop out. Hold the cup no more than a couple of inches above the board, to prevent splashes during the transfer.
Use a new, clean craft stick To move about the two products together completely. Carefully scrape the sides and bottom of the cup to incorporate the two chemicals as thoroughly as possible. Don't be in a rush as you stir, since the catalyst does not begin to cause any hardening effect until about 30 minutes after it's combined with gelcoat.
The gelcoat bottle Testament get directions for how many drops of the catalyst to add by publication. Do not add more than the suggested amount, as this may cause visible cracks and integrity problems in the final gelcoat.3.
5. Use a flexible plastic spreader to work the resin together on the cutting board. Repeatedly spread the mix flat on the board, then scrape it back up into a pile. After you've done this a few times, the gelcoat is ready for application.
