To ice Correct performance, it is influential to replace the brake pads on your CD brakes.
For the brake method on a vehicle to perform properly, the brake pads obligation to be replaced periodically. It is foremost to convert the rear pads on your Ford Explorer before they wear also thin to prevent damage to the rotors. With some brake training, you can copper the rear brakes of your Explorer. You can invest in replacement rear brake pads from a native Car parts store and save interval and mode.
Instructions
Preparing the Vehicle for Brake Removal and Installation
1. Lawns the vehicle on even ground. Settle the vehicle in gear and levy blocks in front of the front wheels to prevent it from rolling.
2. Extended the hood of the vehicle. Tighten the lug nuts onto the wheel studs using a lug wrench.15. Replace any brake fluid that was removed from the master cylinder.16. Dispose of the brake fluid properly.
3. Loosen the lug nuts from the rear wheels of the vehicle using a lug wrench.
4. Uplift the rear of the vehicle using a floor jack. Situate jack stands subservient the vehicle for abutment.
5. Remove the lug nuts and wheels from the vehicle.
Removing the Old Brakes
6. Remove the caliper bolts from the back of the caliper using a socket wrench.
7. Slide the caliper off the CD brake. Adoption a plenty of wire to suspend the caliper housing near the CD brake to prevent damage to the hose.
8. Remove the two brake pads, inner and outer, from the caliper.
Installing the New Brake Pads
9. City a sizeable C-clamp over the brake caliper and clamp the ends against the rear caliper oppose and a minor block of wood against the caliper piston. Tighten the clamp to compress the piston into the caliper Muzzle. Remove the C-clamp and humble block of wood.
10. Subsume the inner brake pad into the caliper and snap it into corner. Press the spring into the piston. Slide one aim of the outer brake pad into the caliper. Rotate the pad into compass until the springs are seated.
11. Distance latest shoe slippers on the rear disc brake adapter located endure the rotor. Attach the caliper to the CD rotor.
After Installing the New Brake Pads
12. City the wheels onto the vehicle. Loosely apartment the lug nuts onto the wheel studs.
13. Raise the rear of the vehicle with the floor jack and remove the jack stands from beneath the vehicle and lower to the ground.
14. Remove half of the brake fluid from the skillful cylinder using a syringe. The proficient cylinder is located in front of the steering trundle on the metal firewall that separates the engine and the item of the vehicle. It is a metal cylinder with a plastic container on top that holds the brake fluid.
Season the brake pads. Make gentle stops while driving for the first week after brake installation.
