Tint Automobile Windows
Tinting offers many benefits, including privacy and UV Safeguard. You Testament hankering to evaluate your skills before enchanting on this project yourself. At the especial least, you'd exceptional be agreeable at measuring and cutting. However this is a precision berth that requires lots of familiarity to receive it correct.
Instructions
Place the first panel on the bottom, the second panel on top of the first, the third panel on top of the second and so on. Identify the defroster line where two panels overlap.15. Trim the film from over the defroster lines.
Section the movie in the shape of the windows. Allot the pieces aside on a glass board or an nature devoted to chop movie. Some companies suggestion pre-cut movie that you can trail for particular models of vehicles.
3. Spray the side window with the soap and damp concoction.
4. Convenience a razor to oomph over the side window to remove any residue.
5. Utilize a 4-inch squeegee to receive rid of any residue from top to backside.
6. Apply the tint to the side window. Leave 1/4 inch to 1/16 inch from the top edge of the window without tint. This will be covered when the window and door are closed.
7. Employ the bone tool and push the tint below the inner rubber seals of the window.
8. Use the hard card to make certain that the tint goes into all the corners.
9. Take a heat gun or blow dryer in one hand and a squeegee in the other, and heat from the top on one side, working the tint with the squeegee on the other side in a horizontal motion. This should get out any remaining moisture from between the film and glass.
10. Use the same procedure to apply the tint film to the front windshield. Note: In many states it is illegal to tint the front windsheild.
11. Follow steps 3 and 5 in applying the film to the rear window. Don't use the razor blade to prep the rear window because the blade can damage the rear defroster.
12. Count the number of defroster lines on the back window.
13. Cut the rear window film into the required number of panels.
14.1. Accumulate the closest tools and materials: tinting movie, an X-acto bayonet, razors, a blow dryer or heat gun, 4-inch squeegees, microscopic sponges, a 4-inch hard card or Bondo card, a bone belongings, and a spray bottle adequate with a alloy of dishwashing soap and baptize.2.
