The Hyundai Santa Fe has an anti-lock braking course (ABS) controller that reduces the braking impact to any spin that is rotating significantly extra slowly than the others.2. Disconnect the bad battery cable with a socket wrench. Unlocked the coupled lock on the hydraulic control unit.
Complete which ABS controller your Hyundai Santa Fe Testament entail. You'll hope for to be decided the modern controller is compatible with your create and design of Santa Fe. All versions of the Santa Fe untrue after 2006 proposition ABS as customary Accoutrement. The ABS controller for a Santa Fe is an integrated chunk of the hydraulic government unit and the two units cannot be separated.
This helps prevent the brakes from locking in an emergency. Whether the ABS warning shine comes on, you may keep a defective ABS controller, nevertheless this does not necessarily produce your vehicle unsafe to handle.
Instructions
1.3. Utilize a socket wrench to unfasten the brake tube nuts. Carefully detach the brake tubes without dangerous or deforming them. Plug and cover the ends of the hose to prevent spilling the brake fluid on your vehicle because it can damage the paint.
4. Remove the three mounting bolts for the hydraulic control unit bracket with a socket wrench so you can detach it from your vehicle. You will also need to use a socket wrench to remove the three bolts that attach the hydraulic control unit to the bracket.
5. Install the hydraulic control unit with the ABS controller by reversing the installation procedure. Be sure to transport and store the new hydraulic control unit in an upright position with the ports sealed. Use a torque wrench to tighten the mounting bolts to between 13 and 19 foot pounds.
